

Built by an Electrician and NCCER Instructor.
One membership from $9.99/month — or pay $150 once and own it for life.
13 residential & 14 commercial steps
Box fill (314.16) & conduit fill (Ch. 9)
From fundamentals to exam prep
“Creating safer electrical workplaces through exceptional education, practical tools, and trusted training resources.”
RESIDENTIAL SAFETY PROTOCOL
NEC Art. 210, 314, 404 · NFPA 70E §130
Open the branch-circuit breaker in the service panel that supplies the work area. Confirm the breaker handle is fully in the OFF position and that no other source feeds the circuit — shared neutrals and multi-wire branch circuits (MWBC) can backfeed a de-energized leg.
Total fill of 10.00 in³ fits within the box capacity of 21 in³ (47.6% used).
NEC 314.16 — Box Fill Calculation
The first lesson of every module is free — read it in full.
MODULE 1: OSHA 10 TRAINING
This lesson provides an in-depth study of OSHA regulations, worker rights, and construction safety standards under 29 CFR 1926.
MODULE 2: OSHA 30 TRAINING
A comprehensive guide to OSHA 30 standards, employer obligations, and hazard management for construction supervisors and electrical professionals.
MODULE 3: FOUNDATIONS OF ELECTRICITY
Master electrical fundamentals of voltage, current, and resistance to understand NEC compliance and safe circuit design for field applications.
MODULE 4: CONDUCTORS & WIRING METHODS
This lesson covers the principles of conductor sizing, ampacity calculations, temperature corrections, and raceway derating in accordance with the 2026 NEC.
MODULE 5: OVERCURRENT & PROTECTION
This comprehensive guide covers NEC Article 240, detailing overcurrent protection, interrupting ratings, and the critical distinction between overloads and faults.
MODULE 6: SAFETY & BEST PRACTICES
This module provides a comprehensive guide to selecting and inspecting NFPA 70E compliant PPE for electrical work.
MODULE 7: NEC CODE MASTERY
This lesson provides an in-depth analysis of Article 100 definitions, which are essential for the correct application and legal interpretation of the entire NEC.
MODULE 8: PRACTICAL CALCULATIONS
Master the NEC 314.16 box fill calculation process to ensure compliance, safety, and professional installation standards for all electrical boxes.
MODULE 9: MOTORS & MOTOR CONTROLS
Master the interpretation of motor nameplates and the accurate application of NEC Article 430 for conductor, overcurrent, and overload protection sizing.
MODULE 10: TRANSFORMERS & POWER SYSTEMS
This unit details transformer operation, the physics of induction, turns ratios, and the specific NEC Article 450 requirements for safe installation and maintenance.
MODULE 11: LIGHTING & LUMINAIRES
This unit provides a technical framework for selecting, mounting, and wiring luminaires according to NEC Article 410 safety and listing requirements.
MODULE 12: RESIDENTIAL WIRING DEEP DIVE
Master the installation, sizing, and safety requirements for residential service entrance equipment according to the 2026 NEC standards.
MODULE 13: COMMERCIAL & INDUSTRIAL WIRING
This unit details the design, installation, and NEC requirements for commercial electrical services and distribution systems.
MODULE 14: RENEWABLE ENERGY & EV CHARGING
Master the installation of grid-tied solar photovoltaic systems by applying NEC Article 690 requirements for DC circuits, inverter connections, and safety protocols.
MODULE 15: INSPECTIONS & TROUBLESHOOTING
A comprehensive guide to conducting a professional pre-inspection checklist to ensure compliance with NEC requirements and avoid common installation failures.
MODULE 16: EXAM PREP & CODE CALCULATIONS
This lesson provides a comprehensive framework for mastering NEC-based journeyman examinations through strategic lookup techniques and calculation methodologies.
Unlock every remaining lesson across all 16 modules with a membership.

Monthly, yearly, or lifetime — every plan unlocks the full safety protocols, both NEC calculators, and the complete 21-module academy.
VIEW PLANS & PRICINGElectrical Safety Compass is a supplemental study aid and field reference tool only. It is designed to help prepare apprentices for their licensing exams and to assist working electricians in the field. It does not replace any required classroom instruction, formal apprenticeship coursework, or supervised on-the-job training mandated by your state, licensing board, or apprenticeship program. Always complete all legally required education and supervised hours before performing electrical work.